2R Hardware & Electronics

2R Hardware & Electronics


GWS NARO PRO /STD/F

Posted: 16 Jul 2012 09:24 PM PDT

GWS NARO PRO /STD/F standard type servo motors GWS.

specifications:
- Type of round: Standard (180Â °)
- Type of control: PWM
- The working voltage: 4.8 V
- Current consumption: -
- Maximum Torque: 1.6 kg / cm @ 4.8V
- The maximum rotary speed: 0.12 sec / 4.8 V @ 60A °
- Dimensions: 27 x 12.7 mm x 22:45
- Weight: 13 g

GWS MICRO/2BBMG servo

Posted: 16 Jul 2012 09:13 PM PDT

The GWS Micro 2BBMG servo motor is less than half the size of a standard-sized servo motor, yet packs an amazing 6.4kg-cm of torque! It features metal gears and a dual ball bearings system for virtually indestructable performance. It's compatible with motors from Futaba, JR, Hitec, Airtronics (Sanwa), Multiplex and other popular servo brands. This servo motor comes with various horns for attachment.

Servo motors are extremely useful in robotics and come in various shapes and sizes. They have built in control circuitry to allow the user to precisely control the position of the motor shaft. Compared to DC motors, servo motors are very powerful for their size.

specifications:
- Type of round: Standard (180Â °)
- Type of control: PWM
- Working Voltage: 4.8 - 6.0 V
- Current consumption: -
- Maximum Torque: 5.4 kg / cm @ 4.8V
- Rotational speed Maximum: 0:17 sec / ° @ 4.8V 60A
- Dimensions: 28.0 x 14.0 x 29.8 mm
- Weight: 28 g
Note: The 2BBMG designation stands for 2 Ball Bearings + Metal Gears

MSC1211Y4PAGT chip

Posted: 16 Jul 2012 04:11 PM PDT

MSC1211Y4PAGT is 8051 family microcontroller with ADC & DAC precision-made Texas Instruments.

specifications:
- Features analog:
· 24-bits resolution.
· Programmable gain amplifier (1-128).
· On-chip voltage reference (accuracy = 0.2%, drift = 5ppm / C).
· 8 differential / single-ended channels.
· On-chip offset / gain calibration and temperature sensor.
· Selectable input buffer, burnout detect.
· 4 16-bit DAC Voltage (settling time = 8us).
- 16 MB Flash Data memory / w security.
- Flash memory partitioning.
- In-system programmable serially.
- 2 MB boot ROM.
- 1280 bytes of data SRAM.
- Dual Data pointer, additional 32-bit accumulator.
- The frequency of the oscillator max 30 MHz, 4 clock per instruction cycle.
- 34 pin I / O, three 16-bit timer / counter, 16-bit PWM.
- System timer, programmable watchdog timer.
- Full duplex dual UART, master / slave SPI / w DMA, multi-master I2C.
- Power management control, internal clock divider, idle and stop modes.
- Programmable brownout reset and low voltage detector.
- 21 interrupt sources, 6 external interrupt, two hardware breakpoint.
- Power supply: +2.7 - +5.25 VDC.
- Package: TQFP-64.

GWS Servo S03T/STD/F

Posted: 16 Jul 2012 01:55 AM PDT

GWS Servo S03T/STD/F
standard type servo motors by GWS

Specs:
- Supply voltage 4.8-6.0V
- Speed ​​sec/60 degrees @ 6V 0:22
- Torque 6.5 kg / cm @ 6V
- Weight 46 g
- Size 39.5x 20.0x 39.5 mm

GWS Servo S125-1T/2BB/F (Futaba)

Posted: 16 Jul 2012 01:41 AM PDT

GWS Servo S125-1T/2BB/F (Futaba)
■ The RC servo (Taiwan) GWS.
■ GWS125-1T/2BB/FUTABA
■  type torque (360-degree rotation) rotation 1: 6.6kg (4.8V) 7.6kg (6V)
■ Weight: 50g
■ Speed: 1.56 seconds degrees / 360 (4.8V)
■ Size: 5cm: 40.5x20x42mm pulley diameter
※ terminal sequence is a Futaba type., Type control: PWM

GWS NARO PRO D. BB/MG/F

Posted: 16 Jul 2012 12:46 AM PDT

GWS NARO PRO D. BB/MG/F
Standard Digital Servo Motor type is equipped with ball bearings


specifications:
- Torque: 2kg-cm @ 6VDC
- Speed: 0.09 s/60 °
- Dimensions: 27 x 12.7 x 24.65 mm

GWS S15CLN/2BBMG/F standard servo

Posted: 16 Jul 2012 12:34 AM PDT

GWS S15CLN/2BBMG/F  core-less standard type servo motors are equipped with 2 GWS Ball Bearings and Metal Gear.

specifications:
- Type of round: Standard (180 deg)
- Type of control: PWM
- Working Voltage: 4.8 - 6.0 V
- Maximum torque: 9.2 @ 6.0 V kg.cm
- Rotational speed Maximum: 0:13 sec / 50 deg@6.0 V
- Dimensions: 40.5 x 20 x 37.5 mm
- Weight: 66.4 g

GWS NARO Super Servo Digital BB/MG/F

Posted: 16 Jul 2012 12:14 AM PDT

GWS Naro BB/MG/F
Digital Servo motors are equipped with a standard type of ball bearings as well as Metal Gear.


specifications:
- Type of round: Standard (180 deg)
- Type of control: PWM
- Working Voltage: 4.8 - 6.0 V
- Current consumption: -
- Maximum torque: 5.0 kg.cm @ 6.0 V
- The maximum rotary speed: 0.08 sec / 60 deg
- Dimensions: 27 x 12.7 x 26.65 mm
- Weight: 19 g

GWS S03N/2BB/F standard servo

Posted: 16 Jul 2012 12:00 AM PDT

The GWS S03N/2BB/F standard type servo motors GWS with 2 Ball Bearings.

specifications:
- Type of round: Standard (180Â °)
- Type of control: PWM
- Working Voltage: 4.8 - 6.0 V
- Current consumption: -
- Maximum Torque: 3.2 kg / cm @ 6.0 V
- The maximum rotary speed: 0.15 sec / 6.0 V @ 60A °
- Dimensions: 39.5 x 20.0 x 35.6 mm
- Weight: 41 g

GWS S777CG/6BB/F heavy duty servo

Posted: 15 Jul 2012 11:48 PM PDT

GWS S777CG/6BB/F heavy duty servo
Heavy dutty production standard GWS servo is equipped with 6 Ball Bearing.


specifications:
- Type of round: Standard (180Â °)
- Type of control: PWM
- The working voltage: 4.8 â € "6.0 VDC
- Current consumption: -
- Maximum torque: 6.0 VDC @ 42 kg.cm
- The maximum rotary speed: 0.12 sec / 6.0 VDC @ 60A °
- Dimensions: 65.0 x 32.0 x 70.4 mm
- Weight: 190 g

The GWS Mini Servo F/BB

Posted: 15 Jul 2012 10:06 PM PDT

The GWS Mini Servo is slightly smaller and lighter than a standard servo, but it delivers the performance of a standard servo. It is recommended for smaller robots, or in projects where space is tight. Servos may be controlled directly from a BASIC Stamp I/O pin by using the PULSOUT command. Two mini servos are used tho make the Parallax Toddler Robot walk. Size: 35.0 mm x 16.9 mm x 32.0 mm.

specifications:
- Torque: 39 oz-in @ 4.8 V or 47 oz-in @ 6.0 V.
- Speed​​: 0.15 sec/60deg @ 4.8 V or 6.0 V. 0.12 @ sec/60deg
- Dimensions: 1.38 x 0.67 x 1.26 ins.
- Weight: 0.94 oz

GWS S03T/HT/BB

Posted: 15 Jul 2012 09:55 PM PDT

GWS S03T/HT/BB
Standard type servo motors GWS production that has great torque and features 2 ball bearings.

specifications:
- Torque: 7.2 kg.cm @ 4.8 V.
- Speed​​: 0.33 sec/60 ° @ 4.8 V.
- Dimensions: 1.56 x 0.79 x 1.56 ins.
- Weight: 46gram