2R Hardware & Electronics

2R Hardware & Electronics


Infrared Proximity Sensor Long Range - Sharp GP2Y0A02YK0F

Posted: 24 May 2012 08:58 PM PDT

Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!

specifications:
- Power Supply: 4.5 VDC - 5.5 VDC
- Able to measure distances in the range: 20cm - 150cm
- Output: analog voltage
- Uses infrared sensors IRED (Infrared Emiting Diode)
- The sensor receiver using a PSD (Position Sensitive Detector)

High Power Transmitter TLP433.92-0.5W

Posted: 24 May 2012 08:42 PM PDT

TLP433.92-0.5W ,RF transmitter module which has a working frequency of 433.92 MHz with ASK modulation with transmit power of 0.5W.

specifications:
- Power Supply: 5V DC
- The working frequency: 433.92 MHz
- Interface: TTL pin 1 (High / Low)
- Data rate: 8kbps
- Modulation: ASK
- Used in conjunction with the receiver: RLP433.92 ASK Receiver

Infrared Proximity Sensor - Sharp GP2Y0A21YK

Posted: 24 May 2012 08:23 PM PDT

Infrared proximity sensor made by Sharp. Part  GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. A replacement module for the GP2D12.

specifications:
- Power Supply: 4.5 VDC - 5.5 VDC
- Current: 30m A
- Distance range: 10-80 cm
- Interface output: analog voltage

LISY300 Gyroscope Module

Posted: 24 May 2012 06:59 PM PDT

The LISY300 Gyroscope Module is a single-axis yaw rate sensor providing up to 300°/s full scale rotation detection at up to 88 Hz. Useful in balancing robots or auto-pilot systems, the LISY300 Gyroscope Module can detect how many degrees it has turned on its planar axis allowing the host microcontroller to stabilize the platform or correct for drift.

Features:
  • ± 300°/s full scale
  • Easy SPI interface
  • Small DIP form factor


Application Ideas:
  • R/C Helicopter stabilization
  • Auto-pilot system for R/C airplanes
  • Balancing robot


Key Specifications:
  • Power requirements: 3.4 VDC to 6.5 VDC (5 VDC recommended) @ 5.25 mA
  • Communication: SPI (4 MHz max)
  • Dimensions: 0.75 x 0.69 x 0.47 in (19.18 x 17.56 x 11.95 mm)
  • Operating temp range: +32°F to +158°F (0°C to +70°C)

Figaro : World leader in Gas sensor innovation

Posted: 24 May 2012 06:23 PM PDT

Using its innovative gas sensing technologies, Figaro Engineering globally provides cost-effective gas sensing solutions for a wide range of applications in the fields of home and personal safety, industrial safety, air quality control, HVAC, home appliances, and the automotive industry.

Figaro's advanced high-volume production facilities stand ready to meet all your gas sensor needs.

several Figaro sensors:

TGS821
Gas sensor has high sensitivity and selectivity to hydrogen gas. This sensor can detect hydrogen gas with a concentration of 30-1000 ppm. The sensor is resistant to high temperatures (ceramic base), and suitable for the application of hydrogen gas detectors.

TGS825
Gas sensor that can detect hydrogen sulfide gas with a concentration of 5-100 ppm. The sensor is resistant to high temperatures (ceramic base), and suitable for the application of Hydrogen Sulfide gas detector.

TGS826
Made of ceramic gas sensors that can detect ammonia gas with a concentration 30-300 ppm. The sensor is suitable for cooling the gas leak detector applications.

TGS832
Made of ceramic gas sensors that can detect concentrations of gas Halokarbon 100 - 3000 ppm. The sensor is suitable for applications Halokarbon and gas detectors detect gas leaks coolant.

TGS2180
Gas sensor that has a high selectivity for water vapor at concentrations of 1-150 g/m3. The sensor is suitable for automatic control applications in the microwave.

TGS2201
Gas sensor that detects the engine exhaust of gasoline and diesel engines at a concentration of 10-1000 ppm and 0.1 to 10 ppm. The sensor is suitable for ventilation control applications (exhaust gas) in vehicles.

TGS2442
Gas sensor that can detect Monosida Carbon (CO) at a concentration of 30-1000 ppm. This sensor has a compact size and low sensitivity to hydrogen gas. These sensors are suitable for CO gas detector applications in the home.

TGS2444
Gas sensor that has a high selectivity for ammonia gas. This sensor can detect ammonia gas at a concentration of 10-100 ppm. Low power consumption of this sensor. The sensor is suitable for ventilation control applications in agriculture and livestock industry.

TGS2600
Gas sensor has high sensitivity to air pengkotor at concentrations 1-30 ppm. The sensor is suitable for the control of indoor air quality.

TGS2602
Gas sensors are sensitive to VOC (Volatile Organic Compound) and foul odor at concentrations of 1-30 ppm. The sensor is suitable for application control of indoor air quality.

TGS2610-D00
Gas sensor that has a high selectivity to LP gas and LP gas can be detected at concentrations of 500-10000 ppm. This sensor has good durability and suitable for the application of marker gas hazards in the home.
There is also a LP gas sensor TGS2610-C00 which has a fast response and is suitable for regulatory application of gas leaks.

TGS2611-E00
Gas sensor that has a high selectivity to methane gas and methane gas can be detected at concentrations of 500-10000 ppm. This sensor has good durability and suitable for the application of marker gas hazards in the home.
Methane gas sensor is also available TGS2611-C00 which has a fast response and is suitable for regulatory application of gas leaks.

TGS2620
Alcohol gas sensors for the concentration of 50-5000 ppm and has a compact size. The sensor is suitable for applications in breath alcohol detector and the detector alcohol solvent.

TGS2612
Gas sensor has a sensitivity of relatively stable between CH4 and LP gas. This sensor can detect the LP gas at a concentration of 500-10000 ppm and has good durability. Suitable for the application of marker gas hazards in the home.

TGS3870
Gas sensor that can detect methane gas at a concentration of 500-12500 ppm and CO gas at a concentration 50-1000 ppm. This sensor gas detector is suitable for applications in the home.

TGS4160
Carbon dioxide gas sensor that has a wide detection range (350-50000 ppm) and good durability. The sensor is suitable for indoor ventilation control applications and application monitoring CO2 in its manufacture, agriculture, and vehicles.

TGS4161
Carbon dioxide gas sensor which has a compact size and low power consumption. This sensor can detect carbon dioxide gas at levels of 350-10000 ppm. Suitable for indoor ventilation control applications and building.

TGS5042
Carbon monoxide gas sensor that detects the type of electrochemical gas levels of 0-1000 ppm. These sensors have a long life time and can operate with batteries.

TGS6810
Catalytic LP gas sensor type that has a wide detection range (0-100% LEL) and has a linear output. These sensors are suitable for gas hazard marker applications in the home.

TGS6812
Catalytic type hydrogen gas sensor which has a wide detection range (0-100% LEL) and has a linear output. The sensor is suitable for the application of Hydrogen gas leak detectors and flammable gas in a fuel cell.

CDM4160
Module-based sensor has been calibrated and TGS4160. This module is suitable for indoor ventilation control applications, monitor CO2 gas, and agricultural applications.

AMS2600
Module-based sensor has been calibrated and TGS2600. This module is suitable for application control of indoor air quality.

FCM6812
Module-based sensor has been calibrated and TGS6812. This module is suitable for gas leak detection applications in fuel cell systems.

LPM2610
Sensor module that has been calibrated based TGS2610 with temperature compensation circuit. This module is suitable for the application of gas detectors in the home.


NGM2611
Sensor module that has been calibrated based TGS2611 with temperature compensation circuit. This module is suitable for the application of gas detectors in the home.

CDM4161
Sensor module that has been calibrated based TGS4161. This module is maintenance free and suitable for indoor ventilation control applications.

KE-25
Oxygen gas sensor Galvanic cell type that is not affected by CO2 gas. This sensor has a long life time and can detect oxygen gas at levels of 0-100%.
There are also other types of oxygen gas sensor is KE-50.

SK-25
The oxygen gas sensor for a compact-sized levels 0-30%. This sensor has good linearity and is not affected by CO2 gas.

UM6-LT Orientation Sensor

Posted: 24 May 2012 04:07 AM PDT

The UM6-LT Orientation Sensor is an OEM version of the UM6.  Like the UM6, the UM6-LT combines data from rate gyros, accelerometers, and magnetic sensors to produce real-time attitude and heading measurements using either quaternions or Euler Angles.
The expansion boards designed for the UM6 can be used with the UM6-LT, but soldering will be necessary.
The UM6-LT is a pin-compatible replacement for the CHR-6dm, which has been discontinued.  While the footprint is compatible with the 6dm, the UM6-LT utilizes the communication protocol of the UM6, not the 6dm.

Outputs (User-Selectable)
GPS position, heading, and velocity (with connected GPS)
GPS position in meters from customizable home location
Euler Angles

Quaternions
Raw gyro, accel, and mag data
Processed sensor data (scale factors applied, biases removed)
Attitude estimate covariance

Features
Supports GPS connectivity and data parsing
GPS position can be reported in meters from user-customizable home position
Automatic gyro bias calibration (initiated by user command)
Adjustable output rates (20 Hz - 300 Hz) and baud rate (up to 115200 baud)
Open-source firmware with free development tools
Open-source PC software for data visualization, calibration, and AHRS configuration


Specifications
States updated internally at 500 Hz
Better than 2 degree pitch and roll angle accuracy1
Better than 5 degree yaw angle accuracy
+5V input voltage, 3.3V logic level (5V tolerant)
+/- 2000 °/s maximum measurable rotation rates
+/- 2g maximum measurable acceleration

This posting includes an audio/video/photo media file: Download Now

TLP433.92A RF Transmitter module

Posted: 24 May 2012 04:10 AM PDT

TLP433.92AUltra Small RF Transmitter module. This module can transmit serial data with a maximum baudrate is 200kbps. Usually these modules are used for applications. applications that do not need a cable like a radio remote control. 

Technical Specifications: 
- DC Power Supply: 2-12 Volt 
- Modulation: ASK 
- Data Rate: 512 bps-200 Kbps 
- Input: Serial asyncronous 
- Transmitter Frequency: 433.92 MHz 
- Current Consumption: 10mA